Miter Cutting and Joining

MORSØ

Morso E Future Green is a fully automatic, electric mitring machine with a two-hand release built on. This makes the machine absolutely safe to operate as it is impossible to start the machine and touch the knives at the same time.

Model EH Turbo

Morso Model EHT mitring machine is exactly the same machine as the Morso EH, with the same technical data and working capacities. BUT it is about 50 percent faster than the EH machine.

Model EH

Morso Model EH is a fully automatic electric/hydraulic mitring machine for cutting wooden, plastic, and MDF picture mouldings.

Model H

Again, there is no problems with dust, as all the waste will be lead directly into a bin ( the bin is not delivered with the Morso H ), through the Morso Waste Chute, which is a standard accessory.

Model F + 10 Deluxe

Morso F plus Ten mitring machine cuts double mitre at 45° and single mitre up to 90°.

Model F Deluxe

Model B

Morso Model B mitring machine is a small and handy table model, designed for glass mouldings and similar, which can be cut once.

AUT 2112

Electro-pneumatic joining-gluing machine with automatic cycle for assembly of any shape and kind of square, hexagonal, octagonal, and dodecagonal frames.

AUT 2100

Electro-pneumatic joining machine with automatic cycle for clamping and inserting conic steel nails, available in coils and in different sizes according to the height of the mouldings.

Sigma 2100

Electropneumatic joining machine for the assembly of any shape and kind of frames either with four, six or eight sides.

S40 Dekor

Pneumatic joining machine with manual shifting or the loader for any kind and shape of frames, either with four sides.

Simple

Pneumatic joining top table machine for the assembly of any shape and kind of frames either with four, six or eight sides, even curves.

C20 Plus

Sawing machine, with vertical pneumatic stroke, for "V-cutting" at 45° degrees, at both ends, in wooden and plastic mouldings of any shape and kind.

Prisma Maxi

Manual sawing machine, with horizontal stroke, for "V-cutting" at 45 degrees, at both ends, in wooden mouldings of any shape and kind (all woods-aluminium covered, etc.).

Prismatic E

Manual sawing machine, with pneumatic horizontal stroke for "V-cutting" at 45 degrees at both ends, in mouldings of any shape and kind.

PrismaCE

Adjustable Angle Double Miter Saw

C20

Double Miter Saw

Miter Cutting and Joining

MORSØ

Brevetti Motta